Author: Josie

Gaseous Prime Power

Posted on by — Leave a comment

With 95 years of experience manufacturing generators we know a thing or two about building industrial grade products that you can rely on. Everyone is familiar with our gaseous standby offerings. They have always been built with heavy duty engines and supporting components making them among the best in the business. Winco is excited to offer configurations of the PSS30, PSS45 and PSS60 that are available with EPA prime power certifications from the factory on both natural gas and LPG. Take a look at the expanded product offerings from Winco.

PSS30

  • Ford 2.5L Prime Engine
  • Stamford Gen End
  • 25.2 kW LP/24.3kW NG
  • CSA and UL2200 Certification
  • 5 Amp Battery Charger

Spec Sheet

PSS45

  • Origin 4.3L Prime Engine
  • Stamford Gen End
  • 42 kW LP/37.8kW NG
  • CSA and UL2200 Certification
  • 5 Amp Battery Charger

Spec Sheet

PSS60

  • Ford 6.2L Prime Engine
  • Stamford Gen End
  • 54kW LP/54kW NG
  • CSA and UL2200 Certification
  • 5 Amp Battery Charger

Spec Sheet

For more information or to make a quote, go to their product pages:
PSS30
PSS45
PSS60

Don’t forget to check out our other blogs and help topics!

– BIG DOG

Our First Parade!

Posted on by — Leave a comment

This year we are going to participate in local parades. Our first parade was on Saturday, March 12th. Our hometown, Le Center, had their 40th St. Patrick’s Day Celebration! We showed off our RP180 and tossed out can koozies and a lot of candy! The weather was nice – remember, we are in Minnesota, 25 degrees and sunny is wonderful.

CLICK TO PLAY!!


A big thank you to the city of Le Center and

to our crew for making it a memorable time!

I am getting excited for our upcoming parades in July!! There will be a BIG surprise showing up!

See you soon!

– Big Dog

Expos – Spring 2022

Posted on by — Leave a comment

Our Sales team traveled down to San Antonio to attend Spray Foam World Wide, the Spray Foam Expo, and the EGSA Spring Conference. This was a great opportunity to showcase our generators, as well as have communication on how WINCO can improve and create generators dedicated to the spray foam industry.

Spray Foam World Wide

WINCO teamed up with Spray Foam World Wide (SFWW) this year and donated a DE30. SFWW gave away a fully equipped spray foam rig, powered by a WINCO DE30. Our DE30 has a new design with a standard rocker manual panel along with the trusted FPT 3.4L engine, coupled to an industrial Cummins gen end.

We had our own give away drawing for a DE50.

Congratulations to Mid Michigan Spray Foam for winning the DE50!

SPRAY FOAM EXPO

The SprayFoam Expo had a record turn-out this year!

Our team was was busy showing off our new gasoline unit and the new DE designs. It was a great opportunity to meet our dealers and end users. This gave us a chance to hear what types of options the industry is looking for.

EGSA SPRING CONFERENCE

We sent Shane and Tyler to Las Vegas to participate in the EGSA Spring Conference. The two-day conference included classes and training on strategies and applications with special keynote speaker, Terry Bradshaw. They were able to meet up with a few of our dealers as well as go golfing with the group. Shane and Tyler were partnered up with Jim and Will from FM generators.

UP NEXT

The re-scheduled PowerGen will be May 23-25, 2022.

We are excited to show off at our largest booth yet!

Meet our newly design RP units and some of our favorite

portables, standbys and PTO!!

See you soon!

– Big Dog

The 70’s Called, They Want Their Load Bank Back

Posted on by — 3 Comments

The air-cooled test bay has been an important piece of equipment for many years. All of our portables and small air-cooled standby generators pass through for their 100% load tests. After many years and thousands of units, it was time to update.

THE OLD

The previous load banks have been with the company since the 70’s. They would tell us amperage, single phase readouts, and hertz.

As the Big-Dogs have gotten larger we needed more testing capacity and the load banks hung too low. This reduced efficiency since some units had to be tested in the liquid-cooled test bay.

FIRST THINGS FIRST – DEMOLITION

We removed everything that was no longer needed, the load banks, the old venting, and sound-proofing.

THE SEA OF RED

During construction, we had to move testing to our old liquid-cooled test bay. Normally the units would be on the conveyor rollers and pushed through the test bay. We had sea of HPS units waiting for their turn to be tested.

THE NEW

The new load bank has a home outside. Don’t worry, it will get used to the Minnesota winters.

The new system allows us to test single and three phase units. We have also added a second station to accommodate our second air-cooled assembly line we will be adding later this year.

Camlocks Installed
New Lighting
Refreshed Paint

We have more exciting changes and updates happening! Stay tuned!!

– Big Dog

Are you ready for Redi Power?

Posted on by — Leave a comment

Our engineering team has been working hard to complete the new RP line. This year, we will be showcasing some of these RP units at the PowerGen 2022.

Features

We made sure our RP units are equipped with everything you would need and then some!

  • Fiat Tier-IV Final Engine
  • Industrial Stamford Gen End
  • Less than 50HP
    Less registration for CA
  • Everything you’d expect from WINCO

Download the spec sheet here.

The RP35

Volts
120/240 1-PH
120/208 3-PH
277/480 3-PH		Prime
27,000
27,000
27,000
EngineFPT F5C
Engine Speed1800 RPM
TierTier IV Final
Motor Starting (Code G)10 HP
Fuel Tank Capacity95 Gal
Fuel Consumption Full Load3.90 Gal/Hr

Stay tuned for more RP units to be announced!!

See you soon!

– Big Dog