Support for Model: Zenith ZTX Transfer Switches
For Technical Support and Parts please call Zenith Support @ 773-299-6600.
| General Information | ||
| Operators Manual ZTX | Operators Manual ZTX-RM |
For Technical Support and Parts please call Zenith Support @ 773-299-6600.
| General Information | ||
| Operators Manual ZTX | Operators Manual ZTX-RM |
Question
Bill –
On my ZTX transfer switch is there anyway I can shut the generator down while it is making power with the transfer switch without going out side to the generator.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Bill, please call Zenith technical support @ 773-299-6600. They will be able to assist you with that product.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
HEROLD JEANNOT –
how to delay transferring ? once in a while ats activated, might be con-ed system transferring. Usually early am
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Herold, you would have an electrician install a time delay relay in the transfer switch to accomplish that.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Charles Prater –
Do you have a zenith 50P-1087 in stock?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Charles, please contact our Parts Department at 507-357-8332 or [email protected].
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Victor –
Good afternoon, I would like to know if the GE ZENITH MX150 (SIE 50P-1160) control board is still in circulation?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Flag for removal
Dale Riebel –
Victor, Zenith transfer switch parts can be sourced by Zenith @ 773-299-6600.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Sergio Rodriguez –
Hi there. I still have a ZTX100 connected to me GEN SET. AT 100A 120/240V. I have some extra control unit modules just in case the actual fails. But the Indicator LEDs front panel module isn’t lit either on the utility side nor the Generator side. And the buttons respond occasionally. This module is identified as MX50. Do you have inventory of it?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Dale Riebel –
Sergio, sorry, no we do not supply Zenith transfer switch parts anymore. Please call them directly @ 773-299-6600. They will be able to supply them if available.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal