Home :: Emergency Standby Generator :: PSS Accessories :: Liquid-Cooled PSS Accessories

Liquid-Cooled PSS Accessories

Liquid-Cooled PSS Accessories
These high quality accessories are compatible with Winco liquid-cooled PSS models.

Products

  •  per page
ASCO 185 Series, 100-400A, 2-wire Start
SKU: 97714-365

The ASCO 185 Series automatic transfer switch (ATS) are 2-wire control switches that are compatible with all 2-wire start systems from all manufacturers. The switch monitors incoming utility power. When the utility power fails it starts the generator and transfer the emergency load onto the generator. After the utility power is restored it will transfer the load back to the utility source, cool down the generator and then return to a standby mode. The ATS has an exercise circuit that tests the generator system every week. The automatic test feature can be set under load or under no load.

 

Contact Dealer/Factory for pricing: $0.00
ASCO 185 Series, 100-400A, 2-wire Start (Service Entrance Rated)
SKU: 97714-432

The ASCO 185 Series automatic transfer switch (ATS) are 2-wire control switches that are compatible with all 2-wire start systems from all manufacturers. The switch monitors incoming utility power. When the utility power fails it starts the generator and transfer the emergency load onto the generator. After the utility power is restored it will transfer the load back to the utility source, cool down the generator and then return to a standby mode. The ATS has an exercise circuit that tests the generator system every week. The automatic test feature can be set under load or under no load.

 

Contact Dealer/Factory for pricing: $0.00
ASCO 300 Series 1600-3000 Amp
SKU: 97714-1600-3-1

The ASCO 300 Series ATS is perfect for applications where power interruptions are not an option. The 300 series switch has proven its dependability in critical industries such as telecom, agriculture, municipal and medical. The equipment is listed to UL standard 1008 to comply with safety and NEC installation requirements. The ASCO 300 Series switches are also the most compact designs for automatic power transfer switches in the industry. The following features set these switches apart.

Contact Dealer/Factory for pricing: $0.00
ASCO 300 Series 30-400 Amp
SKU: 97714-30-2-1

The ASCO 300 Series ATS is perfect for applications where power interruptions are not an option. The 300 series switch has proven its dependability in critical industries such as telecom, agriculture, municipal and medical. The equipment is listed to UL standard 1008 to comply with safety and NEC installation requirements. The ASCO 300 Series switches are also the most compact designs for automatic power transfer switches in the industry. The following features set these switches apart.

Contact Dealer/Factory for pricing: $0.00
ASCO 300 Series 600-1200 Amp
SKU: 97714-600-2-1

The ASCO 300 Series ATS is perfect for applications where power interruptions are not an option. The 300 series switch has proven its dependability in critical industries such as telecom, agriculture, municipal and medical. The equipment is listed to UL standard 1008 to comply with safety and NEC installation requirements. The ASCO 300 Series switches are also the most compact designs for automatic power transfer switches in the industry. The following features set these switches apart.

Contact Dealer/Factory for pricing: $0.00
Large Battery Heater
SKU: 300484-4

The battery blanket prevents the battery from freezing and keeps it at an optimal operating temperature in cold environments. This battery heater kit plugs into the second factory installed receptacle or into the engine heater kit receptacle, depending upon the customer's specific configuration. The battery blanket is not a UL2200 listed option. The large battery blanket is compatible with all Winco and Winpower 12V start emergency standby generators.

Set your own price!
Contact Dealer/Factory for pricing: $0.00
NFPA110
SKU: NFPA110 12V

IMPORTANT: If this generator will be installed in a facility where the loss of electrical power could result in loss of life or personal injury NFPA 110 may be required. It is essential to consult competent professionals to ensure compliance with the rules and regulations governing your specific installations.

WINPOWER products are designed to effectively meet the requirements for the critical facilities with the NFPA 110 adder. The upgrades from the standard product are detailed below.

6 Amp 12 Volt Battery Charger: The SENS automatic 2-rate charger is fast while preserving battery water. The charger compensates for temperature and includes all alarms for NFPA compliance.

Low Coolant Sensor: A switch is added to the radiator to monitor coolant levels and provide the maintenance department a warning if the level drops too far.

Remote Annunciator: The 16 light annunciator panel is designed to mount inside the facility to provide critical equipment information to key facility personnel. The panel has an audible alarm and is designed with a flush mount box.

Set your own price!
Contact Dealer/Factory for pricing: $0.00
NFPA110 250kW+
See details
NFPA110 250kW+
SKU: NFPA110 24V

IMPORTANT: If this generator will be installed in a facility where the loss of electrical power could result in loss of life or personal injury NFPA 110 may be required. It is essential to consult competent professionals to ensure compliance with the rules and regulations governing your specific installations.

WINPOWER products are designed to effectively meet the requirements for the critical facilities with the NFPA 110 adder. The upgrades from the standard product are detailed below.

10 Amp 24 Volt Battery Charger: The SENS automatic 2-rate charger is fast while preserving battery water. The charger compensates for temperature and includes all alarms for NFPA compliance.

Low Coolant Sensor: A switch is added to the radiator to monitor coolant levels and provide the maintenance department a warning if the level drops too far.

Remote Annunciator: The 16 light annunciator panel is designed to mount inside the facility to provide critical equipment information to key facility personnel. The panel has an audible alarm and is designed with a flush mount box.

Set your own price!
Contact Dealer/Factory for pricing: $0.00
Remote Annunciator
See details
Remote Annunciator
SKU: 358456-1

This is a remote annunciator that has 16 configured LED's and works up to 1 KM (0.6 miles) away from the host controller. Up to five of these modules can be hooked-up to one host controller. 

Set your own price!
Contact Dealer/Factory for pricing: $0.00
Remote Display Panel
SKU: 358456-11
The Remote Display Panel (DSE2510) is a display module designed to work with the DSE7310 Auto Start Failure control modules. Up to three display modules can be connected to one host control module, and can be positioned up to a maximum distance of 1km away.
 
The remote displays offer exactly the same instrumentation, control and monitoring capabilities as the host control module, including starting and stopping of the engine. All remote displays connected to the same system, will show the same information at any one time, while the host controller is able to display different information. The modules are simple to operate and feature the same user-friendly menu layout as the host module. All communications and configuration are done via the host module only. The remote devices simply mirror the configuration of the host module, making the system quick and easy to install.
Set your own price!
Contact Dealer/Factory for pricing: $0.00
  •  per page