Home :: Emergency Standby Generator :: PSS Accessories :: Air-Cooled Accessories

Featured Product:

Air-Cooled Accessories

Air-Cooled Accessories
These high quality Winco accessories are compatible with our air-cooled Packaged Standby Systems.

Products

3/4" Vapor Fuel Strainer
SKU: 16243-000

If contaminants enter the fuel system of your Winco emergency standby system you will experience reduced power output and decreased reliability. Winco provides 40 microns of filtration with the demand regulator that is included standard on each air-cool Packaged Standby System. It is a wise investment to add the vapor fuel strainer. This device provides a redundant layer of protection to prevent troublesome contamination that can enter your fuel system from a variety of sources.

Set your own price!
Contact Dealer/Factory for pricing: $0.00
Engine Heater With Thermostat
SKU: 300484-5

Winco air-cooled emergency standby generators use high quality engines that are capable of starting in cold temperatures. In order to ensure quick starting in the coldest environments Winco has designed an engine heater kit that is field installed to keep your engine block warm. The kit includes a thermostat that engages the heater at 50 degrees F (internal cabinet temperature) and shuts off at 60 degrees F. The heating probe is produced by Kim Hot Start and is inserted into the oil pan replacing the second drain plug. The kit is powered from the factory installed duplex receptacle. To allow for the battery heater an additional NEMA 5-15 receptacle is included in the kit.

Contact Dealer/Factory for pricing: $0.00
Small Battery Heater
SKU: 300484-3

The battery blanket prevents the battery from freezing and keeps it at an optimal operating temperature in cold environments. This battery heater kit plugs into the second factory installed receptacle or into the engine heater kit receptacle, depending upon the customer's specific configuration. The battery blanket is not a UL2200 listed option. The small battery blanket is compatible with all Winco air-cooled emergency standby generators.

Set your own price!
Contact Dealer/Factory for pricing: $0.00
Two-Wire Start Kit
SKU: 16448-007

Every automatic standby generator requires safety controls to prevent damage to the equipment. A crank limiter prevents the generator from damaging the start mechanism if the engine won't start. Safety shutdowns like over speed and under speed also detect a problem and shut down the generator to prevent damage. The engine control also opens and closes the fuel solenoid to control fuel flow.

Contact Dealer/Factory for pricing: $0.00